This is basically part 3 in the series of doing stuff with the Noisering, the Hertz Donut, and the Plan B low pass gate. Go back and listen to that which is posted on 3 August and 5 August. This patch is essentially the same. The Noisering sends its random CV to the Hertz Donut, attenuated slightly. The Donut is in “Good” mode, and is connected to the Plan B Model 13 in “both” mode. The signal from the Donut is also attenuated somewhat, as it’s really easy to completely overdrive the Model 13. The envelope for the M13 is provided by Maths. Now the difference here is that the triggers for the whole thing are coming from a Machinedrum. The Machinedrum has a machine called GND IMP which is just a trigger pulse made for things like pre-MIDI drum machines and analog synths. I can sequence these triggers just like any other drum or sound on the MD. I have the track routed through external output F to the CLK IN of the Noisering. That triggers the random CV of the Noisering, and also sends through the clock out the trigger for the Maths envelope.
Now the interesting part here is in the first half of this track. You can hear kind of a little double trigger on each note. I couldn’t figure out what was going on here, thinking it was something happening with the Maths. But then realizing that the notes were changing between each of the little triggers on each beat, meaning that the Noisering was getting two triggers, I realized that the event was taking place on the Machinedrum, not the modular. I noticed that I had the wrong machine chosen for the Machinedrum. It was set to a ROM machine, which is meant for playing back samples, and not the IMP impulse machine. I don’t know — and I wish I’d checked — what the ROM machine was playing. I’m assuming that it had two distinct peaks, whatever it was, which created two triggers. In any case, it sounds great. Like it’s got this funky little swing going. At 1:04 you can hear it change back to single triggers as I swapped the machines out.
The track loops a lot with most of the change coming from the notes played by the Noisering. But closer to the end I’m punching in random steps on the Machinedrum’s sequencer, keeping everything quantized to 16th notes. (In case you want to try this at home, I’m using generic 1/4″ to 1/8″ mono cables I bought at Radio Shack for $5.99. Don’t forget to set the routing for whatever track you’re using for triggers to one of the four external outputs rather than the main output…)